Specifications

EPC-5A Hardware & Software Reference Manual
Page 20
33
EXP-BP4A Subplane
The EXP-BP4A subplane is used to add
either
• two EXP-MC Module Carriers
or
• one EXP-AM Adapter Module.
The EXP-BP4A has seven connectors on
each side.
After jumpering the backplane, plug the
subplane into the VMEbus backplane
such that the P2 connector on the back of
the 4-row DIN is pressed into the J2
connector of the left-most VMEbus slot
that the EPC-5A subsystem will occupy.
The subplane has holes for optional
bolting to the VMEbus backplane using
the screws included.
The EXM slot numbers are shown in the
drawing.
Figure 3-5. EXP-BP4A Subplane.