Specifications

EPC-33/34 Hardware Reference
Page 26
2 2
CMOS Restore Condition:
Use this option to set one of the options for the automatic restore condition. There
are three options, as explained below, ranging from Never to Always, or conditional
on an event. You must first save your BIOS setups to CMOS before you can restore
them automatically.
Always. Every time the device boots, the setup configuration stored in Flash is re-
loaded.
Never (default). During the boot process, the setup configuration stored in Flash is
ignored.
Bad CMOS. Whenever the system detects corrupt CMOS during the boot process,
the setup configuration in Flash is re-loaded.
Load previous values
Use this option if you want to immediately re-load the system with the previous
values before this editing session started. These are not the defaults loaded at the
factory; nor are they the values stored in Flash; these are the values present in the
CMOS that were in use before the current editing session began. You do not exit, so
you can review the changes made as a result of this selection.
Save Current values
Use this option to save the edits you have made during this session. You do not exit,
and you can resume editing. This is useful for lengthy editing sessions involving
several screens.