Specifications

EPC-33/34 Hardware Reference
Page 24
2 2
Do not enable shadowing for the same region you specified for TFFS. When this
ROM extension is installed, it is automatically shadowed. If you make the same
available region available to the ROM and a device driver, for example, a memory
conflict results.
To exit this menu, press the ESC key. You return to the Main Menu.
This completes the setups for the Advanced Menu.
Exit Menu
Use the options in this menu to save your edit(s) as you go along or when you exit
back to the boot process. You can also exit without saving the edits, or go back to the
original default setups installed at the factory. In addition, you can set your system
up to backup or restore the BIOS setups usually stored in CMOS to a second
location, Flash memory. BIOS setups stored in CMOS can be automatically restored
in case of battery failure or if the CMOS becomes corrupt.
PhoenixNoteBIOS Setup - Copyright 1985-94 Phoenix Technologies Ltd.
Main Advanced Exit
Item Specific HelpRadiSys EPC-33/34
Save values & Exit
Discard values & Exit
Get Default Values
Restore CMOS from Flash
Save Current Values
F1 Help Select Item -/+ Change Values F9 Setup Defaults
ESC Exit Select Menu Enter Select Sub-Menu F10 Previous Values
<Tab>, <Shift-Tab>, or
<Enter> selects field.
Backup CMOS to Flash
Load Previous Values
CMOS Restore Condition: [Bad CMOS]
Figure 2-12. Exit Menu.