Specifications

EPC-33/34 Hardware Reference

Page 22

2 2

Integrated Peripherals

Item Specific Help

COM port (DB-9 Connector) [3F8, IRQ 4]

COM port (Header Connector) [2F8, IRQ 3]

F1 Help Select Item -/+ Change Values F9 Setup Defaults

ESC Exit Select Menu Enter Select Sub-Menu F10 Previous Values

LPT port [378, IRQ 7]

Diskette Controller [Enabled ]

IDE controller [Enabled ]

ECP [Enabled ]

Advanced

Figure 2-10. Integrated Peripherals Sub-menu.

COM port/COM port

Use this option to enable and configure or disable the COM1 and COM2 ports. The

COM ports are user-definable for their address range and interrupt.

LPT port

Use this option to enable and configure or disable the LPT (parallel) port. The LPT

port is user-definable for the address range and interrupt. The default for LPT1 is

378 and IRQ7.

Diskette Controller

Use this option to enable or disable the onboard floppy drive controller. This is

useful if you need to enable a separate floppy controller card in your system.

IDE controller

Use this option to enable or disable the onboard IDE controller.