Specifications

Installation and Configuration

Page 17

2 2

Boot Sequence Sub-menu

The Boot Sequence Sub-menu allows you to change the boot sequence options. The

following displays:

Boot Options

Item Specific Help

Boot Delay: [0]

Boot Sequence [C: then A:]

POST Errors: [Enabled]

F1 Help Select Item -/+ Change Values F9 Setup Defaults

ESC Exit Select Menu Enter Select Sub-Menu F10 Previous Values

Floppy Check: [Enabled]

Summary Screen: [Enabled]

SETUP Prompt: [Enabled]

Main

Figure 2-7. Boot Sequence Sub-menu.

Boot Delay:

Use this option to set the system to delay booting for a time period in seconds that

you set. This allows for long start up times on boot devices that spin up slowly. The

default is zero.

Boot Sequence:

Use this option to define how the system treats floppy drive A: when booting. You

can boot from a floppy in the A: drive or boot directly from the fixed disk drive. To

reduce the amount of time required to boot, set the boot sequence to use the C: drive

only. Note that the C: drive may be an IDE drive or Flash memory. The options are

as follows: