Specifications

EPC-33/34 Hardware Reference
Page 14
2 2
IDE Adapter 0 Master/Slave Sub-menus:
These fields are headings for menus that allow you to enter complete disk drive
information. Once the information is entered for the drive, the entry in the Main
Menu shows the drive selected. For more information, turn to the section concerning
the IDE Adapter Menus.
Video System
These fields are the three basic settings to use with your monitor: EGA/VGA, CGA
80x25, and Monochrome.
Boot Sequence Sub-menu
The Boot Sequence Sub-menu allows you to change the boot delay, boot sequence,
and disable several displays during the boot process, such as the SETUP prompt,
POST errors, floppy drive check, and summary screen. Once you have set the boot
sequence, your choice displays in this entry in the Main Menu. For more
information, turn to the section concerning the Boot Sequence Sub-menu.
Keyboard Features (Numlock) Sub-menu
Use this menu to enable or disable various keyboard features, including enabling the
Numlock key, enabling the key click, and setting the keyboard auto-repeat rate and
delay. The Numlock setting displays for this entry in the Main Menu. For more
information, turn to the section concerning the Keyboard Features Sub-menu.
There are two more lines on the Main BIOS Setup Screen: “System Memory” and
“Extended Memory.” These are display-only fields set by the BIOS. No user
interaction is required.
IDE Adapter Sub-menus
There are two IDE adapter sub-menus: one for the master drive and one for the slave
drive. The master drive is the C: drive. To see the detailed characteristics of the
device or to change the device, choose the IDE Adapter 0 Master Sub-menu to
configure the fixed disk. The following screen displays: