Specifications

EPC-33/34 Hardware Reference
Page 12
2 2
BIOS Setup Screens
The EPC-33/34's BIOS contains a Setup function to display and alter the system
configuration. This information is maintained in the EPC-33/34’s nonvolatile
CMOS RAM and is used by the BIOS to initialize the hardware.
The BIOS Setup can only be entered during the boot process, following a power-up,
CTRL-ALT-DEL, or equivalent. Press the F2 key when prompted to enter Setup.
NOTE: The prompt to press the F2 key to enter the BIOS setup can optionally be
suppressed in the BIOS setup. However, you can still press the F2 key to enter the
BIOS setup screens, even if the prompt is suppressed.
Use the up and down cursor (arrow) keys to move from field to field. Use the right
and left arrows to move from menu to menu, as noted in the menu bar at the top of
the screen. If you use the arrow keys to leave a menu and then return, your active
field is always at the beginning of the menu. If you select a sub-menu and then
return to the Main Menu, you return to that sub-menu heading.
Fields with a triangle to the left are actually sub-menu headings; press Enter when
the cursor rests on one of these headings to reach that sub-menu. For most fields,
position the cursor at the field and from the numeric keypad, press the + and - keys
to rotate through the available choices. Certain numeric fields can also be entered
via the keyboard. Once the entry has been changed to appear as desired, use the up
and down arrow to move to the next field.