Specifications

Installation and Configuration
Page 9
2 2
Figure 2-3. EPC-33/34 Layout.
It may be necessary to remove the PC mounting bracket from the EPC-33/34
before mounting flat on a surface.
ISA-bus Passive Backplane
Mechanically, the EPC-33/34 conforms to all outline requirements of the ISA-bus.
The card is 9.5” long (measured from the inside of the end plate) by 4.2” tall
including the card edge connector.
* MAKE SURE SYSTEM POWER IS OFF. THE EPC-33/34 CANNOT BE
INSERTED INTO OR REMOVED FROM A LIVE SYSTEM.
* WHEN INSERTING THE EPC-33/34, AVOID TOUCHING THE CIRCUIT
BOARD, AND MAKE SURE THE ENVIRONMENT IS STATIC-FREE.
* INSERT IT WITH ADEQUATE CONTINUOUS FORCE RATHER THAN
TAPPING OR HAMMERING ON IT.