Specifications

Page 5
2 2
2. Installation and
Configuration
Introduction
Before installing the EPC-33/34, unpack and inspect it for shipping damage.
* DO NOT REMOVE THE MODULE FROM ITS ANTI-STATIC BAG UNLESS
YOU ARE IN A STATIC-FREE ENVIRONMENT. THE
EPC-33/34, LIKE MOST OTHER ELECTRONIC DEVICES, IS
SUSCEPTIBLE TO ESD DAMAGE. ESD DAMAGE IS NOT ALWAYS
IMMEDIATELY OBVIOUS, IN THAT IT CAN CAUSE A PARTIAL
BREAKDOWN IN SEMICONDUCTOR DEVICES THAT MIGHT NOT
IMMEDIATELY RESULT IN A FAILURE.
* ENSURE THAT THE INSTALLATION PROCESS AS DESCRIBED HEREIN
IS ALSO PERFORMED IN A STATIC-FREE ENVIRONMENT.
Pre-Installation
Before you mount or install the EPC-33/34 you should install any jumpers required
for your configuration. Refer to the figure below.