Specifications

Index
I-3
I I
setup, 22
COM1 Connector
pinout, 43
COM2, 2, 38
address map, A-3
interrupt usage, B-1
COM2/LPT Connector
pinout, 48
common error messages, 58
Configuring Additional Ethernet
Controllers, C-6
configuring Flash to be the bootable
device, 16
connecting cables, 10
connecting peripherals, 10
connectors, 41
suggested mates, 41
Contrast Adjust
I/O address map, A-4
corrupt CMOS, 26
creating a non-bootable Flash image, F-
4
creating a bootable Flash image, F-3
CRT and LCD displays
simultaneous support, 2
CTRL+ALT+DEL reset, 37
current master, 34
D
default values
BIOS Setups, 25
DISK BOOT FAILURE, 58
Display Drivers and Utilities, E-1
DMA channel
for floppy disk controller, 39
DMA controllers, 2
DRAM
70ns fast page mode supported, 28
parity DRAM not used, 28
timing, 28
DRAM controller, 2, 28
E
ECP mode
on parallel port, 39
EGA monitor
setup, 14
electromagnetism
(reduced EMI), 1
EMI standards, 1
Enhanced IDE hard drive interface, 2
EPC-33/34 features, 1
error messages, 57
during POST, 11
stop booting if encountered during
POST, 18
ESD protection, 1
Ethernet
configuration using AUTOSET, C-
1
configurations changed with
AUTOSET, 32
connection, 10
connector pinout, 42
default interrupt usage, B-1
doesn't support boot ROM, 32
in memory map, A-1
multiple cards in one system, C-1
packet buffering, 32
unique ID set at factory, 32
Ethernet compatibility, 32
Ethernet controller, 2
Ethernet default configuration, 32
Ethernet subsystem, 32
Extended Capabilities (ECP) parallel
port, 23
extended memory manager, A-1
external reset, 37