Specifications

I-1
I I
Index
3.3V and 5.0V operation supported, 29
32-bit I/O
setup for hard disk drives, 16
A
About Shadow Memory Regions, 23
accessing drives larger than 528
MBytes, 21
additional flat panel setup, E-5
ANSI specifications
drive compliance, 15
AT bus
memory configuration, 28
AT/LANTIC chip, A-2, C-8
for Ethernet, 32
AT-bus Connector
pinout, 55
AT-bus reset
clears SRAM latches, 31
auto-repeat
keyboard feature, 20
AUTOSET, C-1 to C-13
ATLANIC.COM driver, C-10
changes Ethernet configuration, 32
Configuration options, C-1
conflicts, C-4
default base address, C-2
diagnostics, C-3
Error Messages, C-7
factory settings, C-4
I/O base address, C-3, C-4
I/O port vs. Shared memory, C-3
Interrupt, C-5
IPX, C-10
NDIS, C-12
NET.CFG file, C-10
Novell configuration, C-3
ODI, C-10
OS/2 and ODI, C-11
physical media is 10BaseT only, C-
2
PROTOCOL.INI, C-12
shared memory buffer, C-4
skip Boot PROM prompt, C-3
skip Novell configuration prompt,
C-2
Telbin, C-12
Western Digital mode, C-10, C-12
Autotype Fixed Disk, 15
Autotyping
overrides LBA mode control, 16
overrides multi-sector transfer
setup, 16
overrides transfer mode setting, 16
B
backlight, 7
battery, 35
diode and/or resistor protection, 35
BIOS
advanced menu, 20
autotype fixed disk, 15
boot delay, 17
boot sequence, 17
boot sequence sub-menu, 14
COM1 and COM2 ports, 22