Specifications
EPC-33/34 Hardware Reference
Page E-10
E E
4. You will see the list of drivers and their associated resolutions, such as:
CIRRUS 7543 V1.0, 1280X1024X16
CIRRUS 7543 V1.0, 1024X768X16
CIRRUS 7543 V1.0, 640X480X16
CIRRUS 7543 V1.0, 640X480X256
CIRRUS 7543 V1.0, 640X480X64K
CIRRUS 7543 V1.0, 800X600X16
CIRRUS 7543 V1.0, 800X600X256
5. Highlight the desired choice by moving the cursor to the correct display driver,
and then press [Enter].
6. Continue with the remainder of the setup procedure.
To install the Windows 3.1 drivers from within Windows, proceed as follows:
1. Ensure that Windows 3.1 is already installed on your computer and start
Windows.
2. From the Main window of the Program Manager run the Windows 3.1 Setup
program.
3. Select Change Systems Settings... from the Options menu of Setup.
4. Click on the down arrow at the right side of the Display: line. Scroll to the end
of the list of available display drivers and select Other display (Requires disk
from OEM)....
5. Insert the Windows display driver diskette into drive A: and type A:\ as the
pathname, then click on OK.
6. You will see the list of available drivers and their associated resolutions, such
as:
CIRRUS 7543 V1.0, 1280X1024X16
CIRRUS 7543 V1.0, 1024X768X16
CIRRUS 7543 V1.0, 640X480X16
CIRRUS 7543 V1.0, 640X480X256
CIRRUS 7543 V1.0, 640X480X64K
CIRRUS 7543 V1.0, 800X600X16
CIRRUS 7543 V1.0, 800X600X256
7. Highlight by moving the cursor to the desired display driver, and then click on
OK.
8. Continue with the remainder of the setup procedure. The changes will not take
effect until Windows is restarted.