Specifications

Appendix E - Video Modes & Supported Panels
Page E-7
E E
WINMODE
The WINMODE utility runs under Windows 3.1 and allows the user to change the
screen resolution, number of available colors, and to select either large or normal
size fonts and system resources.
This application assumes that the Windows drivers have been correctly installed and
configured using Windows Setup .
If you are unsure what resolutions and colors your video card can support, refer to
the section of this manual on CLMODE for information on how to determine
available resolutions.
WINMODE is run by selecting the WINMODE icon. The first time that you run
WINMODE, the settings for the current driver won't be correct, after you set them
once, they will be correct from then on.
The following selections are made in WINMODE:
Monitor Brand. Select the Monitor Brand button. The Monitor Brand setup window
displays. The current monitor brand is highlighted initially. Use the cursor keys or
the mouse to choose the brand of monitor attached. If your brand is not present, you
may want to check with Cirrus Logic to see if later versions of the WINMODE
software support your monitor brand.
Monitor Model. Select the Monitor Model button. When you select the Monitor
Model button above, a list of recent models sold under that brand name displays. If
your model is not present, you may want to check with Cirrus Logic to see if later
versions of the WINMODE software support your monitor model.
Monitor Refresh Rates. Once the brand and model are selected, WINMODE
displays several options for refresh rates at various settings. For some settings, there
may be only one refresh rate option available. Note also that some of the higher
resolutions may not be supported.
Colors. You can choose 16, 256, 32K, or 64K colors.
Resolution. You can choose 640x480, 800x600, 1024x768, or 1280x1024 resolution.