Specifications

Appendix E - Video Modes & Supported Panels
Page E-3
E E
Windows Installation
The Windows installation utility is located on the diskette labeled VGA Disk 2 of 2 .
To install the desired Windows display drivers and utilities, you must be running
Windows. Insert the diskette into the A: drive, then either use File Manager or the
File/Run method to execute A:\INSTALL.EXE .
Follow the instructions on the screen to install the listed display drivers. A warning
message displays informing you that you should be using the standard Windows
VGA or SVGA driver to proceed. Users who are running Windows under OS/2 also
receive additional instruction.
You can tailor the installation to your needs by selecting the destination drive and
directory. Be sure to enter a directory so that the installation does not simply dump
files into your root. Once the software is copied from the distribution diskette, the
installation creates a Cirrus Logic group and icon if desired. Finally, the
WINMODE application starts, seeking information about your current monitor and
drivers. Note that you can cancel out of WINMODE if necessary.
Contacting Cirrus Logic
If there are any newer versions of the software provided with your SVGA adapter,
they will be available on the Cirrus Logic BBS or their Web site.
The BBS is a WILDCAT! BBS. The phone number is [phone]. It can handle
modems running up to 9600 baud. The modem should be set to NO parity, 8 data
bits, 1 stop bit. Before you are able to download software, you must join the
conference(s) for the product(s) that you are interested in.
The URL for the Cirrus Logic Web site is HTTP://WWW.CIRRUS.COM.
CLMODE
The CLMODE utility allows the user to configure the panel options, define the type
of monitor attached, and set the video modes supported by the Cirrus Logic chipset.
Using CLMODE's Menu-driven Interface
At the DOS prompt type: CLMODE