Specifications

EPC-33/34 Hardware Reference
Page E-2
E E
Before You Begin
The following instructions assume that the user is familiar with DOS and certain
DOS commands. Please review the associated DOS commands before performing the
installation.
Installation
The installation utility is provided to facilitate the smooth installation of the display
drivers and utility software. The installation program is menu-driven and allows you
to select and install only those display drivers for software and applications currently
in use.
It is important to note that some display drivers need to have the associated vendor's
application program already installed on the system prior to loading the Cirrus Logic
SVGA display drivers. In other cases, the loading of the display driver may be an
integral part of the vendor's product installation process. Please review the driver
product section below for specific instructions prior to running the installation
program.
DOS Installation
The DOS installation utility is located on the diskette labeled VGA Disk 1 of 2 . To
install the desired display drivers and utilities, insert the diskette into the A: drive,
then type the following:
A:
EINSTALL
This begins the installation for the English version of the software. Follow the
instructions on the screen to install the listed display drivers and Cirrus Logic
software. The installation process asks you the destination directory, then proceeds.
At any time you may press ESC to abort the installation process and go back to DOS.