Specifications

Chapter 6: Error Messages
39
Table 6-4. Phoenix
 NuBIOS Boot Block Checkpoint Codes
Support Software
The following programs are available for the EPC-6A:
D2h Unknown interrupt error
D4h Pending interrupt error
D6h Initialize option ROM error
D8h Shutdown error
DAh Extended Block Move
DCh Shutdown 10 error
Beep code Post code Checkpoint description
E2h Initialize the system controller
E3h Initialize refresh counter
E4h Check for Forced Flash
E5h Check HW status of ROM
E6h BIOS ROM is OK
E7h Do a complete RAM test
E8h Do OEM initialization
E9h Initialize interrupt controller
EAh Read in bootstrap code
EBh Initialize all vectors
ECh Boot the Flash program
EDh Initialize the boot device
EEh Boot code was read OK
Item Filename Description
RadiSys BIOS
reflash tools and
images
ABORTSWI.EXE When placed in the AUTOEXEC.BAT program, this file
alters the EPC-6A’s boot behavior via the toggle switch.
FLSHDUMP.EXE Dumps the contents of the EPC-6A’s RFA to a 1MB file.
This utility can be used to create “Gold Disks” for the
RFA.
UTILS.TXT Describes the contents of the UTILS directory.
BIOS directory BIOS512K.ROM 512K bios image (used with the FBD command in
forced recovery).
BIOS.ROM 256K bios image (used with the BIOS command in
forced recovery).
BIOS.TXT Describes BIOS images.
Sample directory AUTOEXEC.BAT Sample AUTOEXEC.BAT file which you can use as a
template for the user AUTOEXEC.BAT file.
Beep code Post code Checkpoint description