Specifications

Subplanes
E E
E-5
EXP-BP3A Subplane
The EXP-BP3A subplane allows for a
processor and a total of four EXM
modules.
The EXP-BP3A has five connectors on
each side.
After jumpering the backplane, plug the
subplane into the VMEbus backplane
such that the P2 connector on the back of
the 4-row DIN is pressed into the J2
connector of the left-most VMEbus slot
that the EPC-8 subsystem will occupy.
The EXM slot numbers are shown in the
drawing.
Figure E-4. EXP-BP3A Subplane.
Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com