Specifications

BIOS Configuration
3 3
3-19
Load previous values
Use this option if you want to load the system with the previous values before this
editing session started. You do not exit.
Save Current values
Use this option to save the edits you have made during this session. You do not exit.
Exit and Update BIOS
This option is only for users who plan to update their BIOS from a floppy disk.
NOTE: Do not select this exit option unless you have obtained BIOS update
replacement software from your supplier and have reviewed the documentation and
procedures provided with that distribution.
If you select this option by mistake, any changes made to the BIOS are lost unless you
have already saved them using the Save Current Values option. The system
automatically begins searching for the update program that should be on the floppy
disk inserted in drive A. If there is no floppy, you get two series of beep codes: a long
and two short beeps, followed by three short beeps that repeat. Cycle the power to
reset the system to its previous state.
Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com