Specifications

EPC-8 Hardware Reference
3 3
3-14
EXM Menu
Use this menu to set up the optional EXM expansion modules in your EPC-8. Enter
the EXM-ID, plus option byte information for OB1 and OB2. This information is
found in the hardware reference manual shipped with each EXM expansion module.
Figure 3-8. EXM Menu.
Note the following when installing EXMs:
SLOT indicates the EXM slot in which the EXM is installed.
ID is a hard-wired ID value. Each type of EXM has a unique ID value.
OB1/OB2 are two "option" bytes of configuration information.
PhoenixBIOS Setup - Copyright 1992-94 Phoenix Technologies Ltd.
Main Advanced EXM VME Exit
Item Specific HelpRadiSys EPC-8
EXM Slot 31
ID: FD
Option Byte 1: 01
F1 Help Select Item -/+ Change Values F9 Setup Defaults
ESC Exit Select Menu Enter Select Sub-Menu F10 Previous Values
<Tab>, <Shift-Tab>, or
<Enter> selects field.
Option Byte 2: 00
EXM Slot 0
ID: 7D
Option Byte 1: 07
Option Byte 2: 00
EXM Slot 1
ID: FF
Option Byte 1: 00
Option Byte 2: 00
Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com