Specifications

EPC-8 Hardware Reference
3 3
3-12
Integrated Peripherals Sub-Menu
Use the options in this sub-menu to configure the COM and LPT ports.
PhoenixBIOS Setup - Copyright 1992-94 Phoenix Technologies Ltd.
Integrated Peripherals
Item Specific HelpRadiSys EPC-8
COM 1 [3F8, IRQ4]
COM 2 [2F8, IRQ3]
LPT 1 [378, IRQ7]
F1 Help Select Item -/+ Change Values F9 Setup Defaults
ESC Exit Select Menu Enter Select Sub-Menu F10 Previous Values
ECP [Disabled]
Figure 3-6. Integrated Peripherals Sub-Menu.
COM PORT/COM PORT
Use this option to enable or disable the COM1 and COM2 ports. The default for
COM1 is 3F8 and IRQ4; the default for COM2 is 2F8 and IRQ3.
LPT PORT
Use this option to enable or disable the LPT port address and IRQ. The default is 378
and IRQ7.
ECP
Use this option to enable or disable the Extended Capabilities Port feature of the
parallel port. When this feature is enabled the parallel port becomes bi-directional.
When you are finished, press ESC to exit back to the Advanced Menu.
Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com