Specifications

EPC-8 Hardware Reference
2 2
2-6
indicates jumper neede
d
Figure 2-3. Backplane Jumpers Required for EPC-8 Subsystem.
The figure above shows the jumpers required for a five-slot EPC-8
subsystem, consisting of a two-slot EPC-8, an EXP-MC module carrier for
two additional EXM modules, and an EXP-MX storage module. Note that
the left-most slot does not require any jumpers. All other slots occupied by
the subsystem require all five jumpers be installed.
Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com