Specifications

EPC-8 Hardware Reference
Index-4
R
Read ready, F-8
REAL TIME CLOCK ERROR,
J-11
reboot, 4-11
Release on request, F-4
Request on no request, F-4
reset, 4-8, 4-11, 4-13, 5-12, F-3
interrupt, F-12
watchdog timer, F-13
Response register, F-8
RMW cycle, 5-2
ROM, 4-5
ROM shadowing, 4-5
RONR, F-4
ROR, F-4
round-robin, 2-2, 4-16
Round-robin arbitration, F-4
Run, 4-10
S
SBER bit, 4-20
selftest, F-6
serial port, C-1
Servant, F-7
setup parameters, 4-9
Setup screen, 3-1–3-20
shadowing, 4-5
Shock, 1-4
Signal register, F-7
Signal register FIFO, F-8, F-12
SIMMs, 4-3, D-1
slave boards, 2-5
Slot 0
arbitration, F-4
timeout, F-13
Slot-1, J-3
Slot-1 controller, 2-2, 2-3, 2-5, 4-15,
4-16, J-3
Slot-1 jumper, 2-2
soft reset, 4-13, F-6, F-12
specifications, D-1
SRST bit, 4-8, 4-13
status/ID, 4-18
status/ID value, 4-18
Sticky BERR, 4-20
subplane, 2-3, Error! Not a valid
bookmark in entry on page E-1, E-2,
E-3, E-4, E-5, E-6, E-7
SYSCLK, 2-2, 4-16, F-6
Sysfail, 4-10, F-6, F-12
SysReset, 4-11, 4-14, F-6, F-7
system control functions, 2-2
system controller, 2-2, 4-15
T
Telbin, K-5
Temperature, 1-4
Test, 4-11
Test LED, F-6
TI83000, 4-1
TOD clock, 4-9, J-11
troubleshooting, J-1
U
ULA, F-13
unique logical address, 4-18, F-14
Unique logical address register, F-13
Using the EZSetup Program, H-2
V
VENIX installation, K-8
VGA controller, I-1
display drivers, I-14
two controllers in system, I-1
utility programs, I-4
VGA software installation, I-3
Vibration, 1-4
video, 2-10
Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com