Specifications

EPC-8 Hardware Reference
J
J
J-8
EXM configuration error (with two short beeps)
Problem: The EXMs installed (or not installed) do not match the configuration
information in the CMOS Setup.
Solution(s): Run the BIOS setup program. Enter the EXM menu. Verify the
information listed on the screen, save any changes and reboot. If
necessary, refer to the Chapter 3, BIOS Configuration of this manual
and/or your EXM manual(s) for more details.
General failure reading drive ...
Problem: This almost always indicates the presence of an unformatted hard disk
partition or diskette.
Solution(s): Format the partition or diskette using the utilities supplied by your
operating system.
Incorrect Drive A type - run SETUP or Incorrect Drive B type - Run SETUP
Problem: Type of floppy drive (A: or B:) not correctly identified in BIOS Setup.
Solution(s): Run BIOS Setup and validate correct settings. Also, see “Diskette
drive A error” above.
Invalid drive specification
Problem: You are trying to access a logical drive (e.g., A:, B:, ...) that is not
known to the operating system.
Solution(s): Select a different logical drive. If you are trying to access a hard disk,
you may need to create the logical partition.
Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com