Specifications

Error Messages and Diagnosis
J J
J-5
BIOS Beep Codes
If the BIOS detects a critical error condition while running the Power On Self Test
(POST) code, it may halt after issuing a beep code and attempting to display the error
code in the upper left corner of the screen. The audible codes consist of patterns of
beeps and pauses. If this occurs, you should contact your supplier for technical
support.
Code Beep Pattern Condition
1 short POST OK
2 short POST error, such as EXM configuration or
keyboard error. Refer to the message on the
screen to determine the cause
one long, two
short
Insert BIOS update disk now.
one long, three
short
No video BIOS detected. Install a video EXM
(EXM-13A, for example).
3 short BIOS update disk missing. Either insert the BIOS
update disk or turn the system off and then back
on.
Table J-2. BIOS Troubleshooting Beep Codes.
Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com