Specifications

SVGA
I I
I-15
Installing Windows 3.1 display drivers
If you haven't already installed the SetRES utility program, these instructions will
install a single driver for a single resolution. If you want to be able to easily switch
between different resolutions, you should install SetRES before this procedure.
To install the Windows 3.1 drivers from the DOS prompt, proceed as follows:
1. Insure that Windows 3.1 is already installed on your computer.
2. From your Windows directory, at the DOS prompt, type SETUP to run the
Windows SETUP.EXE program. Follow the instructions on the screen. When
you come to the screen which lists the hardware and software components such as
display adapter (e.g. VGA, CGA, etc.), keyboard type, mouse type, etc., go to the
Display selection by using cursor keys to move the highlighted bar and press
[Enter].
3. From the next menu listing of display options, scroll to the bottom of the list, and
highlight the following text:
Other (Requires disk provided by a hardware manufacturer)
Press [Enter], and when prompted, insert the Windows Display Driver
diskette into drive A:\ or B:\ and type A:\ or B:\[Enter].
4. You will see the list of drivers and their associated resolutions, such as:
CIRRUS 54XX V1.4, 1280X1024X16
CIRRUS 54XX V1.4, 1024X768X16
CIRRUS 54XX V1.4, 640X480X16
CIRRUS 54XX V1.4, 640X480X256
CIRRUS 54XX V1.4, 640X480X64K
CIRRUS 54XX V1.4, 800X600X16
CIRRUS 54XX V1.4, 800X600X256
5. Highlight the desired choice by moving the cursor to the correct display driver,
and then press [Enter].
6. Continue with the remainder of the setup procedure.
Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com