Specifications

EPC-8 Hardware Reference
I I
I-10
SetRES
The SetRES utility runs under Windows 3.1 and allows the user to change the screen
resolution, number of available colors, and to select either large or normal size fonts
and system resources.
After new options have been selected, the user can either immediately restart
Windows, in which case the new resolution will take effect immediately, or continue
working in the current resolution, in which case the new resolution will take effect the
next time Windows is started.
This application assumes that the Windows drivers have been correctly installed and
configured using Windows Setup.
Installation
1. Start Windows.
2. In the Program Manager, choose File Run. Specify the diskette drive
where the Windows Drivers and Utilities Diskette is inserted, and run
the install program. For instance if the floppy is in drive A:, type
A:\INSTALL
3. When prompted, specify the Windows directory.
4. Install and configure the actual Windows driver following the
instructions in the Windows 3.1 section of this manual.
SetRES may now be run by selecting the SetRES icon. The first time that you run
SetRES, the settings for the current driver won't be correct, but go ahead and set them
once, and they will be correct from then on.
If you are unsure what resolutions and colors your video card can support, refer to the
section of this manual on CLMode for information on how to determine available
resolutions.
For help on the SetRES utility, select Help from the program menu.
Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com