Specifications

SVGA
I I
I-3
Easy installation
The installation utility is provided to facilitate the smooth installation of the display
drivers and utility software. The installation program is menu-driven and allows you
to select and install only those display drivers for software and applications currently
in use.
It is important to note that some display drivers need to have the associated vendor's
application program already installed on the system prior to loading the Cirrus Logic
SVGA display drivers. In other cases, the loading of the display driver may be an
integral part of the vendor's product installation process. Please review the driver
product section below for specific instructions prior to running the installation
program.
The installation utility is located on the diskette labeled VGA Disk 1 of 2. To install
the desired display drivers and utilities, insert the diskette into the A: drive, type the
following:
A:
INSTALL
Follow the instructions on the screen to install the listed display drivers. At any time
you may press [ESC] to abort the installation process and go back to DOS.
Selected drivers are simply copied to the specified disk and directory. Applications
may require additional installation as described in the Display drivers section of this
manual.
Cirrus Logic BBS
If there are any newer versions of the software provided with your SVGA adapter,
they will be available on the Cirrus Logic BBS. It is a WILDCAT! BBS. The phone
number is [phone]. It can handle modems running up to 9600 baud. The
modem should be set to NO parity, 8 data bits, 1 stop bit. Before you are able to
download software, you must join the conference(s) for the product(s) that you are
interested in.
Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com