Specifications

EPC-8 Hardware Reference
E E
E-8
EXP-BP6 Subplane
The EXP-BP6 subplane is used in a
configuration with an EPC-8 processor
module, six EXM modules, and an
EXP-MX Mass Storage module.
The EXP-BP6 has eight connectors on
the front side and seven on the rear.
Plug the subplane into the VMEbus
backplane such that the P2 connector
on the back of the 4-row DIN is
pressed into the J2 connector of the
left-most VMEbus slot that the EPC-8
subsystem will occupy.
The EXM slot numbers are shown in
the drawing.
Figure E-7. EXP-BP6 Subplane.
Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com