Specifications

Subplanes
E E
E-7
EXP-BP4A Subplane
The EXP-BP4A subplane is used in
systems needing a CPU and six EXM
modules.
The EXP-BP4A has seven connectors on
each side.
After jumpering the backplane, plug the
subplane into the VMEbus backplane
such that the P2 connector on the back of
the 4-row DIN is pressed into the J2
connector of the left-most VMEbus slot
that the EPC-8 subsystem will occupy.
The EXM slot numbers are shown in the
drawing.
Figure E-6. EXP-B P4A Subplane.
Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com