Specifications
Chapter 3: BIOS configuration
29
Interrupt Configures the serial port interrupt.
You can select one of these:
• IRQ3 (default, Port B)
• IRQ4 (default, Port A)
Note: This field displays only if the Serial Port field
contains a value of [Enabled].
Floppy Disk Controller Determines whether the floppy disk controller is available
for use.
You can select one of these:
• Enabled (default): User configuration.
• Disabled: No configuration.
• Auto: Either the BIOS or OS configures the floppy disk.
Base I/O Address Configures the base address for the parallel port.
You can select one of these:
• Primary (default)
• Secondary
Field Description