Specifications

Chapter 3: BIOS configuration
23
Advanced menu
This menu contains settings for integrated peripherals, memory shadow, cache, and
large disk access mode. You access this menu by selecting Advanced from the Main
BIOS Setup menu.
Figure 3-5. Advanced menu
Main
F1 Help ↑↓ Select Item -/+ Change Values F9 Setup Defaults
ESC Exit ←→ Select Menu Enter Select Sub-Menu F10 Save and Exit
Ethernet 1 Port: [Auto detect]
BIOS Reboot: [Warm Start]
Console Redirection
I/O Device Configuration
PCI Configuration
Cache Memory
QuickBoot Mode: [Disabled]
Installed O/S: [No]
Reset Configuration Data:[No]
PS/2 Mouse: [No]
Legacy USB Support: [Disabled]
Large Disk Access Mode: [Other]
Local Bus IDE adapter: [Both]
Advanced Chipset Control
Main Boot Exit
PhoenixBIOS Setup Utility
Advanced
<Tab>, <Shift-Tab>, or <Enter>
selects field.
Item Specific Help
Field Description
Ethernet 1 Port Determines whether the system checks for Ethernet
connections. You can select one of these:
• Auto Detect (default): The system checks for Ethernet
connections on both the front and rear panel
connectors.
• Front Panel: The system checks for Ethernet
connections on the front panel connectors.
• Real Panel: The system checks for Ethernet
connections on the rear panel connectors.
BIOS Reboot Determines the reboot type. You can select one of these:
• Warm Start (default): The system performs an
abbreviated reboot and preserves DRAM memory
contents.
• Cold Start: The system reboots as if power was cycled.
Console Redirection
sub-menu
Displays a menu that you use to redirect console output.
For more information, see Console Redirection
sub-menu on page 26.