Specifications

EPC-3305 Hardware Reference
14
LegacyDiskette A
LegacyDiskette B
Identifies the type of floppy disk drive installed as the A: or
B: drive.
Possible settings include:
• Disabled (default for the B: drive)
• 1.44/1.25MB 31/2" (default for the A: drive)
Note: The 1.25MB 31/2" diskette requires a 3-Mode
floppy disk drive.
• 1.2MB, 5¼"
• 2.88 MB, 3½"
• 360 KB, 5¼"
• 720 KB, 3½"
Primary Master sub-menu Displays a menu that you use to enter information for the
master IDE drive connected to the primary IDE controller.
For more information, see Primary/Secondary
Master/Slave sub-menus on page 15.
Primary Slave sub-menu Displays a menu that you use to enter information for the
slave IDE drive connected to the primary IDE
controller.For more information, see Primary/Secondary
Master/Slave sub-menus on page 15.
Secondary
Master sub-menu
Displays a menu that you use to enter information for the
Master IDE drive connected to the secondary IDE
controller. For more information, see Primary/Secondary
Master/Slave sub-menus on page 15.
Secondary
Slave sub-menu
Displays a menu that you use to enter information for the
Master IDE drive connected to the secondary IDE
controller. For more information, see Primary/Secondary
Master/Slave sub-menus on page 15.
Boot Options sub-menu Displays a menu that you use to specify the PC’s behavior
during the boot process. For more information, see Boot
menu on page 39.
Keyboard Features
sub-menu
Displays a menu that you use to enable or disable various
keyboard features. For more information, see Keyboard
Features sub-menu on page 19.
UBE Shadow Control
sub-menu
Displays a menu that you use to specify BIOS shadow
options. For more information, see UBE Shadow Control
sub-menu on page 21.
System memory Displays the amount of conventional memory (below
1MB). This field is not editable; no user interaction is
required.
Extended memory Displays the amount of extended memory (above 1MB).
This field is not editable; no user interaction is required.
Field Description