Specifications

EPC-3305 Hardware Reference

• BIOS configuration (For information about setting up the BIOS

configuration, see Chapter 3, BIOS configuration)

• Driver software installation

• Application software installation

Your system may be preconfigured by your supplier or you may need to perform

these tasks yourself.

Maintaining and upgrading the EPC-3305

Removing the EPC-3305

To remove the EPC-3305 from the CompactPCI chassis:

1. Press the latch part of the extractors inward until the extractor handle swings

out and pivots freely.

2. Pull outward on the extractor handles until the EPC-3305 disengages from the

rear connector.

3. Slide the EPC-3305 out of the CompactPCI chassis and place it in the anti-static

bag that it came in.

Replacing the battery

1. Before you begin, write down all the CMOS setup parameters while the battery

is still good, or save them, using the CMOS save and restore feature of the BIOS

configuration as described in the Exit menu on page 40.

2. Turn off the power.

3. Remove the EPC-3305 from the CompactPCI chassis as described in Removing

the EPC-3305.

4. Locate the battery on the main board, then lift the battery out.

If you leave the power on when removing the battery, setup values return

to default conditions.

Figure 2-3. Replacing the battery

Battery