Specifications

5
2
Configuration and installation
This chapter explains how to install the EPC-3305 in a CompactPCI chassis.
When reading this file online, you can immediately view information about any
installation topic by placing the mouse cursor over a connector name and clicking.
Other setup is done by configuring BIOS options as described in Chapter 3,
BIOS configuration.
For information about... Go to this page...
Setting jumpers and headers............................................................................... 6
Inserting the EPC-3305....................................................................................... 7
Maintaining and upgrading the EPC-3305 .......................................................... 8
Removing the EPC-3305.................................................................................. 8
Replacing the battery....................................................................................... 8
Avoid causing ESD (electrostatic discharge) damage:
• Remove modules from their antistatic bags only in a static-free
environment.
• Perform the installation process (described later in this chapter) only in a
static-free environment.
• During external cable installation, ensure that the cables are not active.
The EPC-3305 is not designed for hot insertion of any interface.
The EPC-3305 modules, like most other electronic devices, are susceptible to
ESD damage. ESD damage is not always immediately obvious. It can cause a
partial breakdown in semiconductor devices that might not result in
immediate failure.