Specifications

keyboard is not a valid PC/AT keyboard (e.g., it is a PC/XT-only keyboard), or
(3) you pressed a key during the power-on selftest.
.i.Memory parity interrupt; at ...
This could be a software error (reading a nonexistent memory area) or a true
hardware failure.
Non-system disk or disk error
.i.Non-system disk error;This is usually caused by an attempt to boot from a
disk or diskette that is not formatted as a system disk. Most often it results
when you reboot with a non-system diskette in the floppy drive, because the BIOS
always attempts to boot from the floppy drive if a diskette is installed.
.i.Not ready error; reading drive ...
This is usually caused by not fully inserting a diskette into the floppy drive.
.i.Parity error; in segment ...
This could be a software error (reading a nonexistent memory area) or a true
hardware failure.
.i.Real time clock error; - run setup
The battery-backed .i.TOD clock; is incorrect. Run the BIOS setup program to
determine what is wrong, and correct it. If the error occurs repeatedly, the
EPC-2's .i.battery; has failed.
Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com