Specifications

1 Clock 4 ground
2 Data 5 +5V
3 not used
.G.GPIBCON.EPS;2";0.823";EPS
The GPIB port is a standard shielded IEEE-488 receptacle. The signals are shown
below.
Pin Signal Pin Signal
1 DIO1 13 DIO5
2 DIO2 14 DIO6
3 DIO3 15 DIO7
4 DIO4 16 DIO8
5 EOI 17 REN
6 DAV 18 GND
7 NRFD 19 GND
8 NDAC 20 GND
9 IFC 21 GND
10 SRQ 22 GND
11 ATN 23 GND
12 SHIELD 24 SIG GND
.G.EXTCKCON.EPS;0.3";0.3";EPS
An external 10 MHz clock can be supplied through a miniature SMB coax connector.
The input impedance is 50 ohms. The signal must have TTL levels.
Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com