Specifications

EPC-2 HARDWARE REFERENCE
models of the EPC-2, the setup screen can only be invoked immediately after the SCSI
Fixed Disk message appears near the bottom of the initial selftest screen appears.)
The main setup screen and two secondary ones will be similar to the following.
EPC-2 Setup Screen
20 MHz 386, 4 MBytes memory, no 387 present
Date (mm/dd/yy) 12/02/90
Time (hh:mm:ss) 09:34:56
Configuration Errors Halt on all errors
Diskette Drive A 1.4M 3.5 inch
Diskette Drive B None
Fixed Disk Drive C AT
Fixed Disk Drive D None
Bus Priority Pri 3
Bus Release Mechanism RONR
Bus Arbitration Priority
Slot 0 Functions Internal clock
Parallel Port Mode Normal (Printer)
VGA Monitor Color
Fixed Disk Menu
Fixed Disk Drive C: AT
Type 36 252 MBytes: 1024 Cyls, 8 Heads, 63 Sectors
Landing Zone: 1023 Precompensation: None
Fixed Disk Drive D: None
The EPC-2x has the following additional setup screen.
EXM Setup Screen
ID OB1 OB2
Slot 0 FF 00 00
1 FF 00 00
2 FF 00 00
3 FF 00 00
4 FF 00 00
5 FF 00 00
Some earlier models of the EPC-2 do not have the separate fixed disk menu; the disk
options are on the initial setup screen.
Use the up and down cursor (arrow) keys to move from field to field. For most fields,
once you are positioned at the field, pressing the left and right cursor (arrow) keys will
rotate through the available choices. Once the screen has been changed to appear as you
Page 17
Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com