Specifications

Connectors
Row A Row B Row C
Pin Name Use Name Use Name Use
1 D00 IO BBSY* IO D08 IO
2 D01 IO BCLR*
IO
2
D09 IO
3 D02 IO ACFAIL* I D10 IO
4 D03 IO BG0IN* I D11 IO
5 D04 IO BG0OUT* O D12 IO
6 D05 IO BG1IN* I D13 IO
7 D06 IO BG1OUT* O D14 IO
8 D07 IO BG2IN* I D15 IO
9 GND G BG2OUT* O GND G
10 SYSCLK
IO
1
BG3IN* I SYSFAIL* IO
11 GND G BG3OUT* O BERR* IO
12 DS1* IO BR0*
IO
3
SYSRESET*
IO
13 DS0* IO BR1*
IO
3
LWORD* IO
14 WRITE* IO BR2*
IO
3
AM5 IO
15 GND G BR3*
IO
3
A23 IO
16 DTACK* IO AM0 IO A22 IO
17 GND G AM1 IO A21 IO
18 AS* IO AM2 IO A20 IO
19 GND G AM3 IO A19 IO
20 IACK* IO GND G A18 IO
21 IACKIN* I SERCLK A17 IO
22 IACKOUT* O SERDAT* A16 IO
23 AM4 IO GND G A15 IO
24 A07 IO IRQ7* IO A14 IO
25 A06 IO IRQ6* IO A13 IO
26 A05 IO IRQ5* IO A12 IO
27 A04 IO IRQ4* IO A11 IO
28 A03 IO IRQ3* IO A10 IO
29 A02 IO IRQ2* IO A09 IO
30 A01 IO IRQ1* IO A08 IO
31 -12V P +5VSTDBY +12V P
32 +5V P +5V P +5V P
66
Table 12. VXIbus Signal Usage.
Notes to preceding table:
1
SYSCLK as an input is used only in conjunction with the SYSC bit in the
status/control register. SYSCLK is an output only if the EPC-7 is
configured as the system controller.
2
An output only if the EPC-7 is configured as the system controller.
3
An input only if the EPC-7 is configured as the system controller, or if the
bus release mode is set to RONR.
Page 39
Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com