Specifications

EPC-7 Hardware Reference

Drive Label

Figure 11. Location of Disk Drive Label.

User-Definable Drive Types

If the correct AT disk type is not listed, the EPC-7 provides user-editable drive types

48 and 49. Select either of these drive types. Use the TAB key (

→| )or the left and

right cursor keys (

← →) to move to the next (or previous) field. Note that the default

settings for MBytes, Cylinders, Heads, and Sectors is 1. MBytes is a display-only

field calculated by the BIOS. Move the cursor to each field (Cyls, Heads, and

Sectors) and type the value for that field.

If a drive label exists on the right side panel (refer to Figure 11), use the parameters

listed on the label.

When installing a user-supplied replacement IDE hard disk, consult the hard disk

manual for the correct values to use for cylinders, heads and sectors. The BIOS

allows use of the following maximum values:

Cylinders 1023 Heads 63 Sectors 16

Page 22

Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com