Specifications

B
Appendix
33
IPMI Commands and Managed Sensors
Supported IPMI commands
TheRTMsupportstheIPMIcommandsinTable13.SeetheIntelligentPlatformManagement
InterfaceSpecificationv1.5fordetailsaboutthesecommands.Additionalcommandsmaybe
addedinfutureversionsofthefirmware.
Table 13. Supported IPMI commands
Message Commands NetFn Cmd
Get Device ID App (0x06) 0x01
Broadcast “Get Device ID” App (0x06) 0x01
Cold Reset App (0x06) 0x02
Warm Reset App (0x06) 0x03
Get Self Test Results App (0x06) 0x04
Set Event Receiver S/E (0x04) 0x00
Get Event Receiver S/E (0x04) 0x01
Platform Event (also called “Event Message”) S/E (0x04) 0x02
Get Device SDR Info S/E (0x04) 0x20
Get Device SDR S/E (0x04) 0x21
Reserve Device SDR Repository S/E (0x04) 0x22
Get Sensor Reading Factors S/E (0x04) 0x23
Set Sensor Hysteresis S/E (0x04) 0x24
Get Sensor Hysteresis S/E (0x04) 0x25
Set Sensor Thresholds S/E (0x04) 0x26
Get Sensor Thresholds S/E (0x04) 0x27
Set Sensor Event Enable S/E (0x04) 0x28
Get Sensor Event Enable S/E (0x04) 0x29
Get Sensor Event Status S/E (0x04) 0x2B
Get Sensor Reading S/E (0x04) 0x2D
Get Sensor Type S/E (0x04) 0x2F
Get FRU Inventory Area Info Storage (0x0A) 0x10
Read FRU Data Storage (0x0A) 0x11
Write FRU Data Storage (0x0A) 0x12
Get PICMG Properties PICMG (0x2C) 0x00
Get Address Info PICMG (0x2C) 0x01
FRU Control PICMG (0x2C) 0x04
Get FRU LED Properties PICMG (0x2C) 0x05
Get LED Color Capabilities PICMG (0x2C) 0x06
Set FRU LED State PICMG (0x2C) 0x07
Get FRU LED State PICMG (0x2C) 0x08