Specifications
C
Appendix
88
Power cycling after IPMC FPGA upgrades
SomeRadisysproductsrequirea48VpowercycletoactivatenewIPMCFPGAprogrammingif
theIPMCFPGAisupdated.A48Vpowercycleisaccomplished usingoneofthesemethods:
•Removingthemodulefromtheshelfandthenreinsertingit
•Removingandreapplying48Vtotheentire shelf
Theneedtoperformthepowercycledependsonavarietyofconditions,whicharedescribed
inthisappendix.
Power cycle requirements
Table 8listsRadisysproducts,theirFPGAversionupdates,and48Vpowercycle
requirements.
Table 8. Power cycle requirements
Product
Current
FPGA
Previous
FPGAs
Power cycle required on FPGA update Notes
ATCA-4500, ATCA-4550, ATCA-4555 3.77(.00) 3.72(.00) No 3
ATCA-5014 2.08(.00) none No 3
ATCA-1200 3.07(.00) none Yes 3
ATCA-4300 3.27(.00) none Yes 3
ATCA-7220 3.07(.00) none Yes 3
ATCA-2210 2.51(.00) 2.06(.00) No, if either of the following conditions are met:
• The hardware version is 061-xxxxx-0030 or later and the
IPMC FW version is 5.60 or later from ATCA 3.x.x
• The IPMC FW version is 4.00.00 or later from ATCA 4.x.x
and the IPMC FPGA version is 2.51 or later
1, 2, 3
ATCA-4310 3.28(.00) 3.27(.00) No, if all of the following conditions are met:
• The hardware version is 061-xxxxx-0010 or later
• The IPMC FW version is 1.08 or later from ATCA 3.x.x
• The IPMC FPGA version is 3.28 or later
2, 3
ATCA-5010 2.08(.00) 2.06(.00) No, if all of the following conditions are met:
• The hardware version is 061-xxxxx-0012 or later
• The IPMC FW version is 1.26 or later
• The IPMC FPGA version is 2.08 or later
2, 3
Notes:
1. ATCA-2210 IPMC FW 5.59 or earlier will always read FPGA 2.06. Contact Radisys Support for the actual FPGA version.
2. ATCA-2210, ATCA-4310, and ATCA-5010 FPGA updates are provided in ATCA 3.5.0 and later ATCA 3.x.x releases, and all ATCA 4.x.x
releases. These FPGA updates were provided specifically to allow support for no-reboot IPMC FPGA updates.
3. ATCA 3.x.x software returns versions in the x.yy format; ATCA 4.x.x software returns versions in the xx.yy.zz format.