Specifications

8
Updating IPMI FW and FRU data for an AMC or RTM
75
Updating AMC or RTM FRU data
TheFRUdataforanAMCorRTMmustbeupdatedusingthermcptautility.Enterhelponthe
rmcptacommandline foralistofavailablecommands.
UpdatetheAMCorRTMFRUdatabyenteringthefollowingcommands:
1. rmcpta‐h<shelfIPaddress>
2. targetfwd<carrierIPMBaddress><AMCorRTMIPMB‐Laddress>
3. updatefru<FRUupdatefile>backup.bin
BeforeupdatingthedeviceFRUdata,theupdatefrucommandalsosavesthecurrentdata
tothefilebackup.bin,whichcanbeusedtorecoverthecurrentFRUdataifnecessary.
WhenupdatingtheFRUdata,theutilitymaypromptforinputtoresolvedifferencesin
formatbetweentheoldandnewdata.Itmayalsowarniftheupdatefiledoesnotmatch
thetargeteddevicetopreventitfrombeingupdatedwithincorrectdata.The‐‐auto
optioncanbeusedtoavoidprompts.
ThisisaFRUdataupdateexamplewiththeaddressesandfilenamesincluded:
rmcpta‐h10.2.113.200
targetfwd0x820x7A
updatefruAMC‐72xx‐FRU‐v01‐01.frubackup.bin
parsefru0
Thefinalparsefru0commandverifiestheFRUinformation.