Specifications

6
Board-level updates for the ATCA-45xx CPM and RTM
66
Comparethefollowingexampleoutputwiththe informationdisplayedonyouradapter:
******************************************************************
LSICorporationSASFLASHUtility.
SASFlashVersion1.20.00.00(2008.10.31)
Copyright(c)2006‐2007LSICorporation.Allrightsreserved.
******************************************************************
AdvancedModeSet
AdapterSelectedisaLSISAS1064E(B1):
ControllerNumber:1
Controller:1064E(B1)
PCIAddress:00:05:00:00
SASAddress:XXXXXXX‐X‐XXXX‐XXXX
NVDATAVersion(Default):0x2D07
NVDATAVersion(Persistent):0x2D07
ProductID:0x2704
FirmwareVersion:01.27.00.00
NVDATAVendor:LSILogic
NVDATAProductID:ATCA‐5400
BIOSVersion:06.26.00.00
BIOSAlternateVersion:N/A
EFIBSDVersion:N/A
FCODEVersion:N/A
FinishedProcessingCommandsSuccessfully.
ExitingSASFlash.
Downgrading a CPM to an earlier firmware version
ItmaybenecessarytodowngradethemodulesintheCPMtoanearlierfirmwareversionif
imagecorruptionorincompatibilitiesoccurthatcannotbecorrected.
ACPMdowngradeisdonebyacquiringtheCPMfirmwareupdatebundlefortheversionto
whichyouwanttodowngrade.Eitherrunrsys‐update
andspecifythedowngradeversionof
the.tgzupdatebundle,orperformboardlevelupdatesusingthetoolsandsoftwareand
firmwareupdatefilesinthedowngrade.tgzupdatebundle.
Using rsys-update
1. DowngradethefirstbankfortheCPMusingrsys‐updateandthedowngradeversionofthe
updatebundle.
rsys‐update‐‐path/<tmp‐dir>/<update‐bundle>‐‐automatic
2. DowngradethesecondbankfortheCPMusingtheupdatebundle.
rsys‐update‐‐path/<tmp‐dir>/<update‐bundle>‐‐automatic‐‐redundant