Specifications

6
Board-level updates for the ATCA-45xx CPM and RTM
64
ThefollowinglistdefinestheOpenSessioncommandoptions:
•
14istheIPMIchannelnumber
•
4istherequestedprivilegelevel
•
2istherequestedauthenticationtype
• rootisthedefaultusername
• cmmrootpassisthedefaultuserpassword
Update the RTM alarm CPLD
TheproceduresforupdatingtheCPLDfortheRTMaresimilartotheproceduresinUpdatethe
legacyFPGAonpage 58.SeethatsectionforthetwoRPMfilesthatneedtobeinstalled
basedonyourOS.ThefollowingsvffileforupdatingthealarmCPLDisintheATCA‐5400‐RTM‐
<version>/firmware/cpldfolderonthePromentumsoftwarerelease:
cpm7_alarm_commux_bypass_legacy_bypass.svf
ThefollowingareexamplestepstoprogramthealarmCPLDfromarunningRH5system.
ModifythefilenamesaccordingtoyourOS.Thesestepsmustbeperformedwithroot
permissions.
1. Installorupdatetherequiredsoftwarepackages.
rpm‐UvhispVMEmbedded‐1.2‐5.x86_64.rpmcpm_ioport_module‐1.05‐
1.2.6.18_164.el5.x86_64.rpm
2. Starttheioportservice.Thisstepcanbeskippedifyouhaverebootedoralreadystarted
theioportservicesinceinstallationoftheabovesoftwarepackages.
/etc/init.d/cpm_ioport_modulestart
3. ConverttheCPLDsvffiletovme.NotethattheISPtoolsrequirelowercaseextensions.
rsys‐svf2vme‐infile<file>.svf‐outfile<file>.vme
4. ProgramthealarmCPLD.
rsys‐ispVME<file>.vme
5. VerifytheRTMalarmCPLDversion:
ddif=/dev/portbs=1count=1skip=15802>/dev/null|xxd
Theversionoutputmaybesimilartothefollowing,whichshowsthealarmCPLDversionis
8:
0000000:81