Specifications

Board-level updates for the ATCA-45xx CPM and RTM

Using setdriveinfo

Thermcptasetdriveinfocommandsetsthedriveinformationforthetypeofharddiskdrive

installedontheRTM(SASorSATA).Thisprocedureisneededonlyifyouchangetheharddisk

driveontheRTM.

1. Completethefollowingfields:

Enterthenumberofdrivesinstalled(1):

Enterthedrivetype,0‐FC,1‐SATA,2‐SAS,0xFF‐None(0xFF):2

Enterdrivemanufacturername():

Enterdrivemodel():

Enterdriveserialnumber():

Enterthedesirednumberofcustominfofields(0):

Theenteredinformationisdisplayedtoverifytheentries:

#RadisysRecordID=0x0ADriveInformationRecord

#RecordFormatVersion=0x00

#DriveNumber1

#DriveType=SAS(0x02)

#ManufacturerName=

#Model=

#SerialNumber=

2. Writethedatatothedevicebyenteringyes:

Writethedatatothedevice?[yes/no]yes

WritingthedatabacktothedeviceFRU0informationarea...

DetectedsupportofRadisysOEMGroupWriteFRUDatacommand.(0x2E0x0A)

Verifying the FRU information and completing the update

TocompletetheFRUupdateprocess,executetheparsefrucommandtoverifytheupdated

FRUinformation.

rmcpta‐h10.2.113.200

targetfwd0x860x90

setdriveinfo

updatefruATCA‐5400‐RTM‐FRU‐v01‐00.frubackup.bin

parsefru0

Update the RTM FRU data on a non-Radisys shelf

UsethermcptaOpenSessioncommandtoupgradetheRTMIPMCFRUonanon‐Radisysshelf.

ThefollowingexampleusesaCMMtoupdatetheRTMFRU:

rmcpta‐h<Active‐CMM‐IP>

OpenSession1442rootcmmrootpass

targetfwd<CarrierIPMBAddress><RTMIPMB‐LAddress>

setdriveinfo(optional‐onlyusedifaharddiskdriveisinstalled)

updatefru<RTMFRUUpdateFile>backup.bin