Specifications

6
Board-level updates for the ATCA-45xx CPM and RTM
58
******************************************************************
LSICorporationSASFLASHUtility.
SASFlashVersion1.20.00.00(2008.10.31)
Copyright(c)2006‐2007LSICorporation.Allrightsreserved.
******************************************************************
AdvancedModeSet
AdapterSelectedisaLSISAS1064E(B1):
ControllerNumber:1
Controller:1064E(B1)
PCIAddress:00:05:00:00
SASAddress:XXXXXXX‐X‐XXXX‐XXXX
NVDATAVersion(Default):0x2D07
NVDATAVersion(Persistent):0x2D07
ProductID:0x2704
FirmwareVersion:01.27.00.00
NVDATAVendor:LSILogic
NVDATAProductID:ATCA‐5400
BIOSVersion:06.26.00.00
BIOSAlternateVersion:N/A
EFIBSDVersion:N/A
FCODEVersion:N/A
FinishedProcessingCommandsSuccessfully.
ExitingSASFlash.
Updating the legacy FPGA and SPI flash for ATCA-4500, ATCA-4550, and
ATCA-4555
ThelegacyFPGAandlegacySPIflashcanbeprogrammedeitherfromtherunningOS's
commandlineorexternallyusingaprogrammingcable.Currently,thecommandlineutilityis
therecommendedwa ytoprogramthesecomponents.
Update the legacy FPGA
ThereleasedsoftwarepackagescanbefoundonthePromentumsoftwarerelease.Browse
thelatestreleaseandfindthetarballfortheCPM(forexample,ATCA‐4500/ATCA‐4500‐
2.3.24‐1.tgz).ThistarballcontainspackagesforallsupportedOS's.
TheseRPMpackagesarerequiredtoupdatethelegacyFPGA,basedonyourOS:
RedHat5,64‐bit
• ispVMEmbedded‐<version>.x86_64.rpm
• cpm_ioport_module‐<version>.el5.x86_64.rpm
MontaVista4,32‐bit
• ispVMEmbedded‐<version>.i686.rpm
MontaVista5,64‐bit
• ispVMEmbedded‐<vers ion>.x86_em64t.rpm