Specifications

Board-level updates for the ATCA-45xx CPM and RTM

Updating from the LAN (Shelf Manager)

RecordtheIPaddressoftheactiveShelfManagerandtheIPMBaddressoftheATCAmodule

tobeupgraded.SeeAppendixB,IPMBandIPMB‐Laddressmapping,onpage 85todetermine

theIPMBaddre ss.Forfurtherdetails,refertothespecificshelforcarrierdocumentation.For

theexamplecommandsinthisprocedure,theIPaddressis10.100.18.20andthetarget

moduleisinslot10(IPMBaddress0x8C).Thisinformationcanbeobtainedbyrunningthe

fruinfotoolprovidedintheupdatebundlepackage.

1. VerifythatLANconnectivitytotheShelfManagerIPaddressisestablished:

./rsys‐ipmitool‐Ilan‐H10.100.18.20‐Anonemcinfo

Ifthecommandissuccessfulthencontinuetothenextstep.Ifthecommandfails,contact

yoursystemadministratortore‐establishtheLANinterfacefortheShelfManager.

Note:SomeshelfmanagerRMCPserversrequirelevelsofauthentication,includinga

usernameandpassword.Seethersys‐ipmitoolmanpageforotherrequiredoptions.

2. MakesurethetargetATCAmoduleexistsandiscommunicating:

./rsys‐ipmitool‐Ilan‐H10.100.18.20‐Anone‐t0x8cmcinfo

Ifthecommandfails,themodulecannotbeupgradedinitscurrentstate.Extractand

reinsertthetargetmodule,thenretrythecommand.Ifitstillfails,contactSupportfor

assistance.

3. Verifyifthefirmwarewasupdatedtothelatestversion:

./rsys‐ipmitool‐Ilan‐H10.100.18.20‐Anone‐t0x8chpmcheck

hpm1fw_<version>.img

Thisidentifiestheactive,backup,andfileversions.Itisasnapshotofupgradeable

components.

4. Starttheupgradewiththiscommand:

./rsys‐ipmitool‐Ilan‐H10.100.18.20‐Anone‐t0x8chpmupgrade

hpm1fw_<version>.imgactivate

Thefollowingpromptappears:

Servicesmaybeaffectedduringupgrade.Doyouwishtocontinue?y/n

5. Enterytocontinue.Theupgradetakesseveralminutes.Allcomponentsareupgradedon

thetarget(bootloaderandfirmware)thatdonotmatchtheversionprovidedintheimg

file.

WARNING!

•Donotinterrupttheupgradeonceyoustartit.

•Ifproblemsoccur,donotpoweroffthemodulebeforecontactingSupport.

•Ifthecommandfails,retryitatleasttwomoretimesbeforecontactingSupportfor

assistance.