Specifications

6
Board-level updates for the ATCA-45xx CPM and RTM
48
Updating the IPMI firmware and FPGA for ATCA-4500, ATCA-4550, and
ATCA-4555
ThesefirmwareupgradeinstructionscomplywiththePICMGHPM.1specification.TheIPMI
controllerandassociatedcircuitryincludeanumberofupgradablecomponents.Someof
thesecomponentsareupgradedindividually,whileothersareupgradedasagroup.
YoucanupgradetheIPMIfirmwareandFPGAusingeitherthe KCSinterfaceortheLAN
interface.Forfurtherdetails,refertothespecificshelforcarrierdocumentation.
Preparing rsys-ipmitool
Beforeusingrsysipmitool,verifythattheversionisRadisysbuild2.15ornewerbyrunning
rsysipmitool‐V.Additionally,ifyouhavecopiedthersysipmitoolfileusingaWindows
system,youmustmakethefileanexecutable.EnterthesecommandsattheLinuxprompt:
chmod+xrsysipmitool
./rsysipmitool‐V
Updating from the KCS interface
Whenrsysipmitoolisrunfromthepayloadprocessor(LinuxOS),itusesthelocalKCSpa yload
interface.
1. VerifythatcommunicationispossibletotheIPMC:
./rsysipmitoolmcinfo
2. Ifthepreviouscommandissuccessful,continuetostep3.Otherwise,checkthattheIPMI
driversaresuccessfullyinstalledandretrythecommand.
rsysupdate‐‐path/<tmpdir>/<updatebundle>‐‐versions
3. Copythehpmimagefile intotheOSfilesystem.Theexamplehpmfileforthisprocedure
isfortheATCA4500.
4. CheckthefirmwareimageversionsrunningontheCPMandcontainedinthehpmfile:
./rsysipmitoolhpmcheckcpm7_all.hpm
Thecommandidentifiestheactive,backup,andfileversions,providingasnapshotof
upgradablecomponents.
5. UpgradeandactivatetheCPM:
./rsysipmitoolhpmupgradecpm7_all.hpmactivate
Ifthecommandfails,retryitthreetimesbef orecallingSupportforassistance.
Allcomponentsonthetar get(boot,application,andFPGA)thatdonotmatchtheversion
providedinthehpmfileareupgraded.
6. Aftertheupgradeiscomplete,upgradeandactivatetheapplicationcomponentagain.
Thisisnecessarybecausetheapplication componenthasabackupcopy.
./rsysipmitoolhpmupgradecpm7_all.hpmcomponent1activate