Specifications

2
Performing an update using rfw-update
30
Step 9: Update remaining components
Thefollowingproductsandcomponentsareeithernotsupportedbyrfw‐updateandtheir
updatesmustbehandledseparately,orsomeupdatesneedtobeperformedmanuallyalong
withrfw‐update.Instructionsforupdatingtheseproductsandcomponentsareincludedwith
theindividualcomponentupdatefiles,unlessotherwiseindicated.
Foranexplanationoftheupdatefilesprovided,seeStep2:Obtaintheupdatebundlesfrom
Radisysonpage 17.
•CE3100COMExpressmodule(ATCA‐2210option).
•AdvancedMezzanineCards:AMC‐3201,AMC‐3202,andAMC‐3203HardDriveStorage
Modules.SeeChapter8,UpdatingIPMIFWandFRUdataforanAMCorRTM,onpage 72
forAMCupdateinformation.
•ATCA‐1200RTM.Fordetails,seetheInstallingsoftwareonthecarriersectioninthe
InstallationProcedureSupplementchapterofthePromentumQuadGigabitEthernetAMC
ReferencefortheAMC‐7211andAMC‐7212.SeeChapter8,UpdatingIPMIFWandFRU
dataforanAMCorRTM,onpage 72forIPMIfirmwareandFRUdataupdateprocedures.
•ATCA‐1200customdriversandutilitiesforAMCs,suchastheAMC‐7211andAMC‐7212
hostsupportpackage.ReinstallthepackageasdescribedintheInstallationProcedure
SupplementchapteroftheQuadGigabitEthernetAMCReference.
•AMC‐7211andAMC‐7212IPMIfirmware.Fordetails,seeChapter8,UpdatingIPMIFW
andFRUdataforanAMCorRTM,onpage 72.
•ACPMifitisusedasthehostthatrunsrfw‐update.Therfw‐updateutilitymustnotbe
configuredtoupdatethehostonwhichitisrunning.TheCPMfirmwareandBIOScanbe
updatedusing rsys‐updatebeforeorafterusingrfw‐update.Ifnotdonepreviously,update
theCPMasdescribedinChapter3,Usingrsys‐updateforsingleproductupdates,on
page 31.
• LinuxRPMpackagesprovidedbyRadisysfortheCPMs.RefertoStep3:PreparetheLinux
hostonpage 18forRPMinstallationinstructions.UpdatetheRPMsbeforerunningrsys‐
updateonthemodule,asdescribedinStep3:PreparetheLinuxhostonpage 18.
•RCM(RadisysChassisManager)forthe ATCA‐6014andATCA‐6016shelves.
•FRUdataforthePromentumshelves.SeeChapter7,UpdatingandcustomizingFRUdata,
onpage 68.
•PEMandFANfirmwarefortheATCA‐6006shelf.Refertothereadmefilesonthe
Promentumsoftwa reimage.