Specifications

5
Hardware Management
64
IPMI-over-LAN additional configuration steps
IfIPMI‐over‐LANdoesnotworkafterperformingthebasicsteps:
1. Settheuserprivilegesforbothchannels:
rsys‐ipmitool‐I lan‐H<ShMgr_IP>‐Anone‐t<IPMB>userpriv142
rsys‐ipmitool‐Ilan‐H<ShMgr_IP>‐Anone‐t<IPMB>userpriv242
2. Setthechannelandadministratoraccessforachannel:
rsys‐ipmitool‐Ilan‐H<ShMgr_IP>‐Anone‐t<IPMB>raw060x40<channel>
0x420x44
rsys‐ipmitool‐Ilan‐H<ShMgr_IP>‐Anone‐t<IPMB>raw060x40<channel>
0x820x84
rsys‐ipmitool‐Ilan‐H<ShMgr_IP>‐Anone‐t<IPMB>channelgetaccess
<channel>01
rsys‐ipmitool‐Ilan‐H<ShMgr_IP>
‐Anone‐t<IPMB>channelsetaccess
<channel>01ipmi=onlink=onprivilege=4
3. RepeatStep 2tosetaccesstotheotherchannel.
4. VerifyIPMI‐over‐LANaccessbydisplayingtheSEL.
rsys‐ipmitool‐Ilanplus‐H<IP>‐Anone‐C0sel
SELinformationshouldbedisplayed.IfthiscommanddoesnotdisplaySELinformation
orgivesanerror,seeIPMI‐over‐LANtroubleshootingsteps.
5. RepeatStep 4toverifyaccesstotheIPaddressoftheotherchannel.
IPMI-over-LAN troubleshooting steps
1. Viewthecurrentsettingsforachannel:
rsys‐ipmitool‐I<protocol>‐H<ShMgr_IP>‐Anone‐t<IPMB>lanprint
<channel>
2. VerifythattheIPaddressiscorrect.
3. Verifythatanon‐zeroMACaddressisset.
AMACaddressof00:00:00:00:00:00indicatestheEthernetcontrollerisnot
respondingtoqueries.ThiscanoccuriftheEthernetcontrollerdoesnothavethe
correctEEPROMfile.UpgradetheBaseEEPROMimageandthefront/rearEthernet
EEPROMimageusingtheimagefilesandinstructionsfromtheRadiSyssoftware
distribution.
4. Repeatsteps1–3tocheckthesettingsfortheotherchannel.